Denali D2 BMW GS additional light kit

The DENALI CANsmart™ D2 kit for BMW R 1250 / 1200 GS / Adventure consists of:

DENALI CANsmart 2.0 Plug-n-Play Controller (1x)
DENALI D2 LED 10W additional lighting - per unit (2x)

The DENALI D2 2.0 LED TriOptic™ Light Kit with DataDim Technology produces a remarkable amount of light in a very compact package that is perfect for all riding styles and motorcycle types. With a powerful 10-watt Cree LED, the DENALI D2 projects a powerful beam 160 m down the road.

Housed in compact aluminum housings, the DENALI D2s are perhaps the most versatile model available: powerful enough to be your primary driving light, yet small and light enough to comfortably mount on a fender. The DENALI D2s feature a durable black powder-coated finish and special cooling fins to ensure the LED itself runs cool and bright. New to the DENALI 2.0 series is a corrosion-resistant Impact PC™ bezel that ensures your lights will stay looking great even after repeated impacts from rocks and debris.

Also new to the DENALI 2.0 generation is the industry-leading TriOptic™ lens system. Each light comes with a spot lens (installed) and a flood lens (included)—nothing else to purchase. The spot lens produces the greatest beam distance, while the flood lens produces a wider spread of light closer to the motorcycle, filling the roadside and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. No matter which lens you choose, the D2 2.0 kit lets you see the road (or lack thereof) and be seen by other vehicles around you. It's that simple: See further, be seen better, with DENALI!

Specifications:

10 Watt Cree XPL HI LEDs (per lamp)
Power consumption: 1.6 amps (total)
Beam distance (spot): 160m
Beam width (spot): 22m
Raw lumens: 2190
Intensity: Single intensity harness
DataDim™ Compatible: Yes
Operating voltage: 12v
Pod size: Ø55x60mm
Harness the flexibility and intelligence of your motorcycle's CAN Bus electrical system to make accessory installation significantly easier with the new and improved DENALI CANsmart™ GEN II Controller. The DENALI CANsmart™ Controller offers plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled directly from the CANsmart™ Accessory Manager software.

The four CANsmart circuits are pre-programmed to connect and independently control two sets of DENALI lights, a SoundBomb horn and the B6 auxiliary brake light.

Gen II - More features, more power, more versatility

Unlike the CANsmart Gen I, the Gen II's four circuits can provide 10 amps of continuous power, and each circuit can be configured to run any type of accessory. The maximum power draw for the entire unit remains 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for better visibility and set your left and right side marker lights to turn off independently when you activate the corresponding turn signal.

Features

High/Low Beam Sync - Set the low beams to cycle between a programmable high/low beam setting using the factory high beam switch.
ON/OFF and Dim - Independently control two sets of lights ON/OFF and change the intensity level (day or night) from the vehicle's original switches.
Headlight Dimming - Set your auxiliary lights to dim to increase your visibility to other drivers.
Flash to Pass - Need to get someone's attention? Press the high beam switch three times and your auxiliary lights will flash three times quickly.
Turn Signal Override - This feature overrides the corresponding auxiliary light when you activate your turn signal, preventing strong auxiliary lights from overriding your turn signal.
Hazard Reverse Flash - This feature causes your auxiliary lights to flash in reverse to your hazard lights, increasing visibility in the event of an emergency on the road.
Plug & Play Horn Installation - Quickly and easily connect high-power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
Strobe with Horn - With this feature selected, the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or the SoundBomb™ horn installed.
Smart Brake Technology - CANsmart™ reads real-time vehicle speed to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the smart brake feature will activate.
Flash Pattern Braking - CANsmart™ provides four different flash patterns that make our super-bright auxiliary brake lights even more noticeable to motorists behind you. You can set the auxiliary brake lights to flash only under hard braking, flash continuously when you brake, or flash four times quickly and then remain steady (California-legal flash rate).
Circuit Function Selector - The CANsmart software's Circuit Function Selector allows you to operate any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop-down menu and select from the list of available circuit functions.
Switched Power Source - The CANsmart™ provides a universal "accessory" option that simply gives you clean, switched 12V power. This means any accessory you connect to this circuit will turn on and off with your ignition. Time Delay - You can also set accessories on this circuit to have a time delay. This will keep them powered for up to 30 seconds after you turn off your bike. On-Board Power - The "accessory" circuit option is great for powering your GPS, phone, heated gear, or other electronics.