The DENALI CANsmart™ D3 kit for BMW R 1250 / 1200 GS / Adventure includes:

- DENALI CANsmart GEN 2.0 Plug-n-Play Controller
- DENALI D3 TriOptic LED auxiliary lighting - per unit (2x)

The new D3 LED lights are based on a decade of DENALI innovation to deliver the most powerful 36-watt driving light on the market. The D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving light meets ECE and SAE standards to provide an impressive legal driving light in North America and European Union countries. But what if you don’t care about legal street accuracy and just want off-road overkill? We’ve got you covered too! The D3 spot lens is designed for a maximum beam distance of over 1900 feet at 1 lux (per pair). No other 36-watt light comes close. The beam is so impressive it outperforms the lights of the highest-performing competitors that are twice as large.

The D3 is also available in a SAE and ECE certified fog light version for drivers seeking a true, super-wide, legal fog beam with a sharp horizontal "cutoff"

Features

TriOptic™ lens system (spot and hybrid lenses included in each module)
Best-in-class spot and hybrid beams for road use (SAE/DOT and ECE certified)
High-intensity Cree LED series producing 2100 lumens per pod
3-wire DataDim™ smart dimming technology (compatible with all DENALI dimming controllers)
DrySeal™ Submersible Waterproof lighting can withstand the harshest environments.
PC Impact™ Polycarbonate collars don’t crack, fade, or corrode like traditional aluminum collars.
LiveActive™ thermal management keeps LEDs cool, preventing brightness loss due to overheating.
Low-profile mounting bracket with stainless steel hardware included
Additional hybrid driving lens SAE/DOT and ECE certified included (spot lens installed)
Amber and selective yellow lenses available (sold separately)
Beam performance (pair)

Spot beam
Beam distance (at 1 lux): 582 meters (1910 feet)
Beam width (at 1 lux): 30 meters (100 feet)

Combined beam (1 spot, 1 hybrid)
Beam distance (at 1 lux): 463 meters (1520 feet)
Beam width (at 1 lux): 53 meters (175 feet)

Hybrid beam
Beam distance (at 1 lux): 320 meters (1050 feet)
Beam width (at 1 lux): 69 meters (225 feet)

Specifications (single module)

Pod size: 90 mm (3.5") diameter x 66 mm (2.62") depth
LED: (3x) 11-watt Cree XP-P LEDs
Power consumption: 36 watts (3 amps)
Lumens: 2100
DataDim™ compatible: Yes
Operating voltage: 9-32V DC
IP67 waterproof and submersible
Hybrid lens certifications: SAE/DOT J581 & ECE R112
Spot lens certifications: ECE R112

Leverage the flexibility and intelligence of your motorcycle’s CAN bus electrical system to greatly simplify accessory installation with the new enhanced DENALI CANsmart™ GEN II controller. The DENALI CANsmart™ Controller offers plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled directly from the CANsmart™ Accessory Manager software.

The four CANsmart circuits are pre-programmed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and the B6 auxiliary brake light.

Gen II - More functions, more power, more versatility

Unlike the CANsmart Gen I, the four circuits of Gen II can provide a continuous power of 10 amps each, and each circuit can be configured to operate any type of accessory. The maximum power draw for the entire unit remains 30 amps continuous. Gen II also offers two new settings for the auxiliary light. You can now modulate your auxiliary lights for better visibility and set your left and right side lights to turn off independently when you activate the corresponding turn signal.

Features

High Beam/Low Beam Synchronization - Set the low beams to switch between a programmable high beam/low beam setting using the original high beam switch.
ON/OFF and Dim - Independently control two sets of lights ON/OFF and adjust the brightness level (day or night) using the vehicle's original switches.
Light Modulation - Set the auxiliary lights to modulate to increase your visibility to other drivers.
Flash to Pass - Need to get someone's attention? Press the high beam switch three times and your auxiliary lights will flash three times quickly.
Cancel with Turn Signal - This function cancels the corresponding auxiliary light when you activate your turn signal, preventing powerful auxiliary lights from overpowering your turn signal.
Hazard Reverse Flashing - This function makes your auxiliary lights flash opposite to your hazard lights, increasing visibility in road emergency situations. 
Plug & Play Horn Installation - Quickly and easily connect high-power aftermarket horns like our SoundBomb™ without needing to add an extra harness or relay.
Strobe with Horn - With this function selected, the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This function works whether you have the factory horn or the SoundBomb™ horn installed.
Deceleration-Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time to activate your brake light during deceleration even before you touch the brake. You can adjust the sensitivity and minimum speed at which the smart brake function activates.
Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our auxiliary brake lights super bright and even more noticeable to drivers behind you. You can set the auxiliary brake lights to flash only during hard braking, flash continuously while braking, or flash four times quickly then stay steady (legal flash rate in California).
Circuit Function Selector - The CANsmart software's circuit function selector lets you operate any accessory of your choice on any of the four circuits. Click on a circuit icon to open the dropdown menu and make your selection from the list of available circuit functions.
Switched Power Supply - The CANsmart™ provides a universal "accessory" option that simply gives you a clean switched 12V power supply. This means any accessory you connect to this circuit will turn on and off with your ignition. Delay Timer - You can also set accessories on this circuit to have a delay timer. They will remain powered for up to 30 seconds after you turn off your bike. Onboard Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear, or any other electronic device.